AS/NZS 2041.6:2010

1-AS/NZS 2041.6:2010 BURIED CORRUGATED METAL STRUCTURES - BOLTED PLATE STRUCTURES
4-PREFACE
5-CONTENTS
7-SECTION 1 SCOPE AND GENERAL
7-1.1 SCOPE
8-1.2 DESIGN AND INSTALLATION
8-1.3 NORMATIVE REFERENCES
9-1.4 DEFINITIONS
9-1.4.1 Bedding
9-1.4.2 Camber
9-1.4.3 Compaction
9-1.4.4 Corrugation
9-1.4.5 Cover
9-1.4.6 Depth of corrugation
9-1.4.7 Diameter, internal
9-1.4.8 Flexibility factor
10-1.4.9 Foundation
10-1.4.10 Pitch of corrugation
10-1.4.11 Protective coating
10-1.4.12 Skew number
10-1.5 NOTATIONS
13-SECTION 2 SPECIFICATION
13-2.1 GENERAL
13-2.2 MARKING OF STRUCTURES
14-SECTION 3 MATERIALS AND FABRICATION FOR B68 STRUCTURES
14-3.1 SCOPE OF SECTION
14-3.2 MATERIALS
14-3.2.1 Base material
14-3.2.2 Steel sheet
16-3.2.3 Steel bolts and nuts
17-3.2.4 Aluminium sheet
18-3.2.5 Aluminium bolts and nuts
19-3.3 FABRICATION
19-3.3.1 General
19-3.3.2 Sinusoidal corrugations
19-3.3.3 Sheet tolerances
21-3.3.4 Bolt-holes and slots
21-3.4 REPAIR OF DEFECTS AND COATINGS
21-3.4.1 General
21-3.4.2 Assessment and repairs of damaged coatings
24-SECTION 4 MATERIALS AND FABRICATION FOR B152 STRUCTURES
24-4.1 MATERIALS
24-4.1.1 Steel plate
25-4.1.2 Steel bolts and nuts
26-4.2 FABRICATION
26-4.2.1 General
26-4.2.2 Sinusoidal corrugations
26-4.2.3 Plate tolerances
27-4.2.4 Bolt-holes
29-4.2.5 Plate identification and traceability
29-4.3 REPAIR OF DEFECTS AND COATINGS
29-4.3.1 General
29-4.3.2 Assessment and repairs of damaged coatings
32-SECTION 5 MATERIALS AND FABRICATION FOR B200 STRUCTURES
32-5.1 MATERIALS
32-5.1.1 Steel plate
33-5.1.2 Steel bolts and nuts
33-5.1.3 Aluminium plate
34-5.1.4 Aluminium bolts and nuts
34-5.2 FABRICATION
34-5.2.1 General
34-5.2.2 Sinusoidal corrugations
35-5.2.3 Plate tolerances
35-5.2.4 Bolt-holes
36-5.2.5 Plate identification and traceability
36-5.3 REPAIR OF DEFECTS AND COATINGS
36-5.3.1 General
36-5.3.2 Assessment and repairs of damaged coatings
39-SECTION 6 MATERIALS AND FABRICATION FOR B230 STRUCTURES
39-6.1 MATERIALS
39-6.1.1 Aluminium plate
39-6.1.2 Steel bolts and nuts
40-6.1.3 Aluminium bolts and nuts
40-6.2 FABRICATION
40-6.2.1 General
40-6.2.2 Sinusoidal corrugations
41-6.2.3 Plate tolerances
41-6.2.4 Bolt-holes
42-6.2.5 Plate identification and traceability
42-6.3 REPAIR OF DEFECTS
42-6.3.1 General
44-SECTION 7 MATERIALS AND FABRICATION FOR B381 STRUCTURES
44-7.1 MATERIALS
44-7.1.1 Steel sheet
45-7.1.2 Steel bolts and nuts
46-7.2 FABRICATION
46-7.2.1 General
46-7.2.2 Sinusoidal corrugations
46-7.2.3 Plate tolerances
48-7.2.4 Bolt-holes
48-7.2.5 Plate identification and traceability
48-7.3 REPAIR OF DEFECTS AND COATINGS
48-7.3.1 General
48-7.3.2 Assessment and repairs of damaged coatings
50-SECTION 8 SECTION PROPERTIES FOR DESIGN
50-8.1 SCOPE OF SECTION
50-8.2 DIMENSIONS AND TOLERANCES
50-8.3 MATERIAL AND SECTION PROPERTIES
59-SECTION 9 SHAPE LIMITATIONS
60-APPENDIX A - GUIDELINES FOR DESIGN INFORMATION FOR SUPPLY AND INSTALLATION
60-A1 GENERAL
60-A2 DESIGN INFORMATION TO BE SUPPLIED TO THE MANUFACTURER AND INSTALLER
61-A3 INFORMATION TO BE SUPPLIED BY THE MANUFACTURER
61-A4 MARKING
64-APPENDIX B - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
64-B1 SCOPE
64-B2 STATISTICAL SAMPLING
64-B3 PRODUCT CERTIFICATION
65-B4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
65-B5 OTHER MEANS OF ASSESSMENT