AS/NZS 4284:2008

1-AS/NZS 4284:2008 TESTING OF BUILDING FACADES
4-PREFACE
6-CONTENTS
7-1 SCOPE
7-2 REFERENCED DOCUMENTS
7-3 DEFINITIONS
7-3.1 BMU
7-3.2 Framing members
7-3.3 Specifier
7-3.4 Test facility
8-3.5 Uncontrolled water
8-4 NOTATION
8-5 PRINCIPLE
8-6 APPARATUS
9-7 SAMPLE PREPARATION
9-7.1 Test sample
9-7.2 Drawings
10-8 PROCEDURE
10-8.1 Test sequence
10-8.1.1 General
10-8.1.2 Variation of test sequence or retesting
10-8.2 Preliminary tests
10-8.2.1 General
10-8.2.2 Static pressure
10-8.2.3 Water
10-8.3 Structural test at serviceability limit state
10-8.3.1 Structural-test pressures
11-8.3.2 Location of the displacement transducers
11-8.3.3 Pressure loading sequence
12-8.3.4 Displacement measurement of spandrel panels
13-8.3.5 Calculation of deflection/span ratio
13-8.3.6 Calculation of successive member displacement
13-8.3.7 Calculation of maximum displacement
13-8.4 Air infiltration test
13-8.4.1 Test pressure
14-8.4.2 Procedure
14-8.5 Water penetration test by static pressure
14-8.5.1 Test pressure
14-8.5.2 Procedure
14-8.6 Water penetration test by cyclic pressure
14-8.6.1 Test pressure
15-8.6.2 Procedure
15-8.7 BMU restraint test
15-8.7.1 Test load
15-8.7.2 Procedure
15-8.8 Structural test at ultimate limit state
15-8.8.1 Test pressures
16-8.8.2 Procedure
16-8.8.3 Spandrel panel
16-8.9 Seismic test
16-8.9.1 Test displacement
16-8.9.2 Procedure
16-8.10 Seal degradation test
17-9 PERFORMANCE REQUIREMENTS
17-9.1 General
17-9.2 Structural test at serviceability limit state
17-9.2.1 Deflection/span ratios
17-9.2.2 Successive member displacement
17-9.2.3 Maximum displacement
17-9.3 Air infiltration test
17-9.4 Water penetration test
17-9.5 Seismic test at serviceability limit state displacement
17-9.6 BMU restraint test
18-9.7 Structural test at ultimate limit state
18-9.8 Seismic test at ultimate limit state displacement
18-9.9 Seal degradation test
18-10 TEST REPORT
18-10.1 Preliminary test report
18-10.2 Official test report
20-APPENDIX A - INFORMATION TO BE SUPPLIED BY SPECIFIER
23-APPENDIX B - SAMPLE PREPARATION
23-B1 INTRODUCTION
23-B2 TEST SAMPLE
25-B3 REQUIREMENTS
26-B4 INCLINED GLAZING
27-APPENDIX C - STRENGTH TEST AT ULTIMATE LIMIT STATE LOADING
32-APPENDIX D - AIR INFILTRATION TESTING
34-APPENDIX E - WATER PENETRATION TESTING
36-APPENDIX F - SEISMIC TESTING