AS/NZS 4805.2:2007

1-AS/NZS 4805.2:2007 ACCESSORIES FOR ELECTRIC CABLES-TEST REQUIREMENTS - IMPREGNATED PAPER-INSULATED METAL-SHEATHED CABLES...
4-PREFACE
5-CONTENTS
6-SECTION 1 SCOPE AND GENERAL
6-1.1 SCOPE
6-1.2 REFERENCED DOCUMENTS
7-1.3 DEFINITIONS
7-1.3.1 Branch joint
7-1.3.2 Connector
7-1.3.3 Erosion
7-1.3.4 Indoor termination
7-1.3.5 Outdoor termination
7-1.3.6 Straight joint
7-1.3.7 Terminal box
7-1.3.8 Termination
7-1.3.9 Tracking
8-1.3.10 Transition joint
8-1.4 VOLTAGE DESIGNATIONS AND TEMPERATURE RATING
8-1.4.1 Rated voltages
8-1.4.2 Rated temperature
9-SECTION 2 ASSEMBLY OF ACCESSORIES TO BE TESTED
9-2.1 CABLES
9-2.2 CONNECTORS
9-2.3 ACCESSORIES
9-2.4 ASSEMBLY INSTRUCTIONS
9-2.5 CONDITION OF ACCESSORIES
9-2.6 RECORDING
10-SECTION 3 CONDITIONS AND RANGE OF APPROVAL
10-3.1 RANGE OF APPROVAL
10-3.2 CONDUCTOR MATERIAL
10-3.3 FORM OF CONDUCTOR
10-3.4 NUMBER OF CORES
10-3.5 TYPE OF CABLE
10-3.6 RATED VOLTAGE
10-3.7 CLEARANCES
11-SECTION 4 TESTS
11-4.1 CATEGORY OF TESTS
11-4.2 TEST METHODS
11-4.3 TEST ARRANGMENTS
11-4.4 TEST SEQUENCES
11-4.5 TEST RESULTS
11-4.5.1 General
11-4.5.2 Accessory failure
12-4.5.3 Cable failure
17-APPENDIX A - IDENTIFICATION OF THE TEST CABLE
17-A1 PAPER-INSULATED CABLES (see Clause 2.1)
18-A2 EXTRUDED INSULATION CABLES (see Clause 2.1)
19-APPENDIX B - TEST FOR 'HYDRAULICALLY BLOCKED' CONNECTORS USED IN TRANSITION JOINTS BETWEEN PAPER-IMPREGNATED CABLES AND CABLES WITH EXTRUDED INSULATION
19-B1 TEST PROCEDURE
19-B2 CRITERIA
21-APPENDIX C - HYDRAULIC PRESSURE TEST METHOD FOR CABLE TERMINATIONS
21-C1 SCOPE
21-C2 APPLICATION AND RANGE OF QUALIFICATION
21-C3 PRINCIPLE
21-C4 TEST SPECIMENS AND TEST CONFIGURATION
21-C5 APPARATUS
22-C6 SAMPLE PREPARATION
22-C7 PROCEDURE
23-C8 CRITERIA OF FAILURE
23-C9 TEST REPORT