AS/NZS 5078:2007

1-AS/NZS 5078:2007 DOMESTIC SOLID FUEL BURNING APPLIANCES-PELLET HEATERS-METHOD FOR DETERMINATION OF POWER OUTPUT AND...
4-PREFACE
5-CONTENTS
7-SECTION 1 SCOPE AND GENERAL
7-1.1 SCOPE
7-1.2 APPLICATION
7-1.2.1 General
7-1.2.2 Included appliances
7-1.2.3 Excluded appliances
7-1.3 REFERENCED DOCUMENTS
7-1.4 DEFINITIONS
8-1.4.1 Appliance operating instructions
8-1.4.2 Average efficiency
8-1.4.3 Burn rate
8-1.4.4 Calorimeter room
8-1.4.5 Efficiency (overall efficiency or appliance efficiency)
8-1.4.6 Hopper
8-1.4.7 Inlet air damper
8-1.4.8 Peak power
8-1.4.9 Pellet fuel
8-1.4.10 Pellet fuel feed assembly
8-1.4.11 Test burn period
8-1.4.12 Shall
8-1.4.13 Should
8-1.5 PRINCIPLE
9-SECTION 2 APPARATUS
9-2.1 AMBIENT TEMPERATURE MEASUREMENT SYSTEM
9-2.2 APPLIANCE TEMPERATURE MEASUREMENT SYSTEM
9-2.3 WEIGHT DETERMINATION EQUIPMENT
9-2.4 MASS FLOW MEASUREMENT SYSTEM
9-2.5 AMBIENT AIR PRESSURE MEASUREMENT SYSTEM
9-2.6 ANEMOMETER
10-SECTION 3 TEST ENCLOSURE AND FLUE
10-3.1 GENERAL
10-3.2 ROOM INSULATION
10-3.3 LENGTH OF FLUE
10-3.4 EXPOSED FLUE WITHIN CALORIMETER ROOM
10-3.4.1 Freestanding appliances
10-3.4.2 Fireplace-insert appliances
10-3.5 AIR TEMPERATURES
10-3.6 AIR PRESSURE
11-3.7 WALL TEMPERATURES
11-3.8 AIR FLOW
11-3.9 CALIBRATION
11-3.9.1 General
11-3.9.2 Calorimeter room
11-3.9.3 Barometer
11-3.9.4 Anemometer
11-3.9.5 Weighing instruments
14-SECTION 4 MEASUREMENT ACCURACY
14-4.1 TEMPERATURE AND MASS FLOW
14-4.2 CALORIMETER ROOM SCALES
15-SECTION 5 TEST FUEL
16-SECTION 6 TEST PROCEDURE
16-6.1 PREPARATION BEFORE TESTING
16-6.1.1 Conditioning burn
16-6.1.2 Post-conditioning adjustment
16-6.1.3 Ash
16-6.1.4 Fire lighting
16-6.1.5 Pretest burn cycle
16-6.2 FUEL LOADING
16-6.3 BURN RATES
17-6.4 TEST BURN PERIOD
17-6.5 NUMBER OF BURN PERIODS
17-6.6 DATA-RECORDING INTERVAL
17-6.7 OPERATION OF THE APPLIANCE
17-6.7.1 Burn-rate control
17-6.7.2 Fans
17-6.7.3 Other controls
17-6.7.4 Automatic controls
18-6.8 APPLIANCES WITH A WATER-HEATING FACILITY
18-6.9 DUCTED APPLIANCES
19-SECTION 7 EFFICIENCY
20-SECTION 8 CALCULATION AND REPORTING OF RESULTS
20-8.1 CALCULATIONS
20-8.1.1 Average power
20-8.1.2 Heat output
20-8.1.3 Energy input
20-8.1.4 Efficiency
20-8.1.5 Burn rate
20-8.2 REPORT
21-SECTION 9 MARKING
21-9.1 GENERAL
21-9.2 COMPULSORY PERMANENT MARKING
21-9.3 FUEL TYPES
21-9.4 ADDITIONAL MARKING
22-9.5 RETESTING EXEMPTION