AS 3785.7-2006

1-AS 3785.7-2006 UNDERGROUND MINING-SHAFT EQUIPMENT - SHEAVES
4-PREFACE
5-CONTENTS
6-1 SCOPE
6-2 REFERENCED DOCUMENTS
7-3 DEFINITIONS
7-3.1 Conveyance
7-3.2 Conveyance rated load
7-3.3 Dead load
7-3.4 Design rope break load
7-3.5 Design working life
7-3.6 Fleet angle
7-3.7 Insert
7-3.8 Live load
7-3.9 Rope break load
7-3.10 Shall
8-3.11 Sheave
8-3.12 Should
8-3.13 Statutory authority
8-3.14 Winding rope
8-3.15 Wrap angle
8-4 MATERIALS
8-5 MANUFACTURE
9-6 DESIGN
9-6.1 Loads
9-6.2 Load combination
9-6.2.1 Static design
9-6.2.2 Fatigue design
9-6.3 Design criteria
9-6.3.1 Rim, spoke, web and hub (including connections)
10-6.3.2 Shafts
10-6.3.3 Bearings
10-6.3.4 Construction design
11-7 NON-DESTRUCTIVE TESTING
11-8 TEST CERTIFICATES
11-8.1 Certificates required
12-9 MARKING
13-APPENDIX A - INFORMATION TO BE PROVIDED BY THE PURCHASER
14-APPENDIX B - INFORMATION TO BE PROVIDED BY THE SUPPLIER
15-APPENDIX C - SHEAVE RIM DIMENSIONAL PROPORTIONS
15-C1 SCOPE
15-C2 SHEAVE RIMS WITHOUT INSERTS
15-C3 SHEAVE RIMS WITH INSERTS
15-C4 SHEAVE GROOVE DIMENSIONS
18-APPENDIX D - TREAD PRESSURE BETWEEN ROPE AND SHEAVE
18-D1 SCOPE
18-D2 TREAD PRESSURE DESIGN BASIS
20-APPENDIX E - SHEAVE DIAMETER
21-APPENDIX F - ALLOWABLE WEAR FOR SHEAVE RIMS WITHOUT INSERTS