AS 2318-2006

1-AS 2318-2006 SWIVELS FOR LIFTING APPLICATIONS
4-PREFACE
5-CONTENTS
6-1 SCOPE
6-2 REFERENCED DOCUMENTS.
7-3 DEFINITIONS
7-3.1 Competent person
7-3.2 Self°coloured
7-3.3 Shall
7-3.4 Should
7-3.5 Working load limit (WLL)
7-3.6 Swivel
7-3.6.1 Shank
7-3.6.2 Shank°retaining system
8-3.6.3 Nut°retaining device
8-3.6.4 Bearing surface
8-3.6.5 Bearing
8-3.6.6 Connecting member
8-4 CLASSIFICATION
9-5 MATERIAL
9-6 DESIGN AND MANUFACTURE.
9-6.1 Forgings
9-6.2 Welding
9-6.3 Shank
10-6.4 Threads
10-6.5 Nuts and collars
10-6.6 Hooks
10-6.7 Heat treatment
10-6.8 Surface finish
11-6.9 Rolling element bearings
11-6.10 Assembly
11-6.11 Finishing
11-6.12 Lubrication
12-7 MECHANICAL PROPERTIES
12-7.1 Strength
12-7.2 Ductility
12-7.3 Permanent set
12-7.4 Rotation
12-8 TESTING OF MECHANICAL PROPERTIES
13-9 PROOF TESTING
13-9.1 Proof force
13-9.2 Requirements
13-9.3 Test certificate
14-10 MARKING
14-10.1 General
14-10.2 Information
14-11 CARE AND USE
15-APPENDIX A - INFORMATION THAT SHOULD BE SUPPLIED WITH ENQUIRIES AND ORDERS
16-APPENDIX B - LIFTING TACKLE STANDARDS
17-APPENDIX C - CARE AND USE
17-C1 WORKING LOAD LIMIT (WLL)
17-C2 CORRECT FITTING
17-C3 ROTATION
17-C4 LUBRICATION
17-C5 CLEARANCES
17-C6 CONTACT BETWEEN THE NUT OR BEARING AND SEATING
18-APPENDIX D - DETERMINATION OF WORKING LOAD LIMIT
19-APPENDIX E - CONDITIONS FOR APPLICATION OF TEST FORCES
20-APPENDIX F - MEANS FOR DEMONSTRATING COMPLIANCE WITH THIS STANDARD
20-F1 SCOPE
20-F2 STATISTICAL SAMPLING
20-F3 PRODUCT CERTIFICATION
21-F4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
21-F5 OTHER MEANS OF ASSESSMENT