1-AS/NZS 1972:2006 ELECTRIC CABLES-UNDERGROUND COAL MINES-OTHER THAN REELING AND TRAILING
4-PREFACE
5-CONTENTS
7-SECTION 1 SCOPE AND GENERAL
7-1.1 SCOPE
7-1.2 APPLICATION
8-1.3 REFERENCED DOCUMENTS
8-1.4 DEFINITIONS
8-1.4.1 Communications circuit assembly
8-1.4.2 Electrically symmetrical
9-1.4.3 Non°hygroscopic
9-1.4.4 Pitch circle diameter
9-1.4.5 Shall
9-1.4.6 Should
9-1.4.7 Support member
9-1.4.8 Suspended length
9-1.4.9 Voltage designation
10-SECTION 2 0.6/1 (1.2) kV CABLES FOR FIXED APPARATUS
10-2.1 SCOPE OF SECTION
10-2.2 DESIGN
10-2.3 CONSTRUCTION
11-2.4 CONDUCTORS
11-2.5 FILLERS
11-2.6 SCREENS
11-2.6.1 General
11-2.6.2 Conductance
11-2.6.3 Additional requirement for cables with individually screened cores
11-2.7 COLLECTIVE TAPE SCREEN
11-2.7.1 General
12-2.7.2 Conductance
12-2.8 ARMOUR
12-2.8.1 Type of armour
12-2.8.2 Conductance
12-2.9 TESTS
13-SECTION 3 ARMOURED CABLES FOR USE AT WORKING VOLTAGES OF 1.9/3.3 (3.6) kV UP TO AND INCLUDING 19/33 (36) kV
13-3.1 SCOPE OF SECTION
13-3.2 CONDUCTORS
13-3.3 SCREENS FOR CABLES MANUFACTURED IN ACCORDANCE WITH AS/NZS 1429.1
13-3.3.1 General
13-3.3.2 Conductance
13-3.4 ARMOUR FOR CABLES MANUFACTURED IN ACCORDANCE WITH AS/NZS 1026
13-3.4.1 Type of armour
13-3.4.2 Conductance
14-3.5 OUTER SHEATH
14-3.6 MARKING
14-3.7 TESTS
15-SECTION 4 FEEDER CABLES
15-4.1 SCOPE OF SECTION
15-4.2 TYPES OF CABLES
15-4.3 CONSTRUCTION
15-4.3.1 Type A feeder cables
15-4.3.2 Type B feeder cables
15-4.4 CONDUCTORS
15-4.5 INSULATION
15-4.5.1 Material
16-4.5.2 Thickness
16-4.6 SCREENS
16-4.6.1 Construction
16-4.6.2 Coverage
16-4.6.3 Conductance
16-4.7 COVERING ON PILOT CORES
16-4.7.1 Material
17-4.7.2 Thickness
17-4.8 LAYING UP OF CORES
17-4.9 SHEATH
17-4.9.1 Material and application
17-4.9.2 Thickness
17-4.10 EXTERNAL MARKING OF CABLE
18-4.11 TESTS
19-SECTION 5 MACHINE CABLES
19-5.1 SCOPE OF SECTION
19-5.2 TYPES
20-5.3 DIMENSIONS FOR MACHINE CABLES
20-5.4 TYPE 1
20-5.4.1 Design
20-5.4.2 Conductors
20-5.4.3 Insulation
21-5.4.4 Screens
22-5.4.5 Fillers
22-5.4.6 Covering
22-5.4.7 Tests
22-5.5 TYPES 2 AND 2S
22-5.5.1 Design
22-5.5.2 Conductors
23-5.5.3 Semiconductive screens for 3.3/3.3 kV cables
23-5.5.4 Insulation
23-5.5.5 Screens
23-5.5.6 Fillers
23-5.5.7 Covering-Type 2 cables only
23-5.5.8 Sheath-Type 2S cables only
23-5.5.9 Pilot and control conductors
24-0 10 Tests
24-5.6 TYPES 3 AND 3S
24-5.6.1 Application
24-5.6.2 Design
24-5.6.3 Conductors
24-5.6.4 Insulation
24-5.6.5 Screens
24-5.6.6 Fillers
24-5.6.7 Covering-Type 3 cables only
25-5.6.8 Sheath-Type 3S cables only
25-5.6.9 Pilot conductor
25-5.6.10 Tests
25-5.7 TYPES 7 AND 7S
25-5.7.1 Conductors
25-5.7.2 Glass braid
25-5.7.3 Insulation
26-5.7.4 Screen
26-5.7.5 Covering-Type 7 cables only
26-5.7.6 Sheath-Type 7S cables only
26-5.7.7 Tests
26-5.8 TYPE 8
26-5.8.1 Design
26-5.8.2 Conductors
26-5.8.3 Insulation
27-5.8.4 Screens
27-5.8.5 Fillers
27-5.8.6 Pilot conductors
27-5.8.7 Covering
27-5.8.8 Tests
27-5.9 TYPE 9
27-5.9.1 Design
27-5.9.2 Conductors
27-5.9.3 Insulation
27-5.9.4 Core identification
27-5.9.5 Pairs and triads
28-5.9.6 Screens
28-5.9.7 Fillers
28-5.9.8 Covering
28-5.9.9 Tests
28-5.10 MARKING
28-5.10.1 Marking on cables
28-5.10.2 Marking of drums
30-SECTION 6 MINE SHAFT WINDER CABLES
30-6.1 SCOPE OF SECTION
30-6.2 DESIGN
30-6.3 CONDUCTORS
30-6.4 INSULATION
30-6.5 TEXTILE BRAIDING OVER CORES
31-6.6 CORE IDENTIFICATION
31-6.7 SCREENED COMMUNICATION CORES
31-6.8 SUPPORT MEMBERS
32-6.9 FILLERS AND BINDERS
32-6.10 LAY-UP OF CABLE CORES
32-6.11 TEXTILE BRAID OVER LAID-UP CORE ASSEMBLY
32-6.12 SHEATH
32-6.12.1 Material
32-6.12.2 Thickness
33-6.13 SUSPENDED LENGTHS
33-6.14 MARKING
33-6.14.1 Marking on cables
33-6.14.2 Marking of drums
33-6.15 TESTS
33-6.15.1 General
35-6.15.2 High voltage test on completed cable
35-6.15.3 Flexing test
37-APPENDIX A - INFORMATION TO BE SUPPLIED WITH ENQUIRY AND ORDER
38-APPENDIX B - RECOMMENDATIONS FOR THE SELECTION OF PAPER, OR POLYMERIC INSULATED CABLES
38-B1 SCOPE
38-B2 SYSTEM CATEGORIES
38-B3 CABLE SELECTION
40-APPENDIX C - TABLES OF DIMENSIONS FOR MACHINE CABLES
43-APPENDIX D - CALCULATION OF SUSPENDED LENGTHS FOR CABLES