AS 5079.2-2003

1-AS 5079.2-2003 FILING CABINETS - VERTICAL FILING CABINETS (ANSI BIFMA X5.3-1997, MOD)
4-PREFACE
7-1 SCOPE
8-2 Definitions
8-2.1 acceptance level:
8-2.2 accessory item:
8-2.3 adjustable glides:
8-2.4 anti-rebound:
8-2.5 cabinet:
8-2.6 case:
8-2.7 caution label:
8-2.8 clear dimensions:
8-2.8.1 clear depth:
8-2.8.2 clear height:
8-2.8.3 clear width:
8-2.9 clear space:
8-2.10 closed:
8-2.11 compartments:
8-2.12 compressor:
8-2.13 counterweights:
8-2.14 cycle:
8-2.15 doors:
9-2.16 extendible member:
9-2.17 force:
9-2.18 fully extended:
9-2.19 functional load:
9-2.20 ganging:
9-2.21 interlock:
9-2.22 lbf.:
9-2.23 leveled:
9-2.24 load:
9-2.25 lock:
9-2.26 loss of serviceability:
9-2.27 N (Newtons):
9-2.28 proof load:
9-2.29 pull:
9-2.30 stability:
9-2.31 stops:
9-2.32 suspension:
9-2.33 test platform:
9-2.34 tip over:
9-2.35 vertical file:
11-3 General
11-3.1 Types of Tests
11-3.2 Tolerances
11-3.3 Manufacturers Instructions
13-3.4 Loading Guidelines
13-3.4.1 Loading Material for Extendible Members
13-3.4.2 Loading Guidelines for Dynamic Testing of Extendible Members with Bottom Supported Loads.
13-3.4.3 Loading Guidelines for Dynamic Testing of Extendible Members without Bottom Supported Loads.
15-3.5 Recommended Test Report Format
17-4 Stability Test
17-4.1 Purpose of Test
17-4.2 Test Setup
17-4.3 Test Procedure
17-4.4 Acceptance Level
19-5 Rebound Test
19-5.1 Purpose of Test
19-5.2 Test Setup
19-5.3 Test Procedure
19-5.4 Acceptance Level
21-6 Out Stop Test
21-6.1 Purpose of Test
21-6.2 Test Setup
21-6.3 Test Procedure
21-6.4 Acceptance Level
23-7 Lock Test
23-7.1 Purpose of Test
23-7.2 Test Setup
25-7.3 Test Procedure
25-7.4 Acceptance Level
27-8 Extendible Member Cycle Test
27-8.1 Purpose of Test
27-8.2 Test Setup
27-8.3 Test Procedure
27-8.4 Acceptance Level
29-9 Latch Test, Static
29-9.1 Purpose of Test
29-9.2 Test Setup
29-9.3 Test Procedure
29-9.4 Acceptance Level
31-10 Compressor Test
31-10.1 Purpose of Test
31-10.2 Test Setup
31-10.3 Test Procedure
31-10.4 Acceptance Level
33-11 Racking Resistance Test
33-11.1 Purpose of Test
33-11.2 Test Setup
33-11.3 Test Procedure
33-11.4 Acceptance Level
35-12 Strength Test
35-12.1 Purpose of Test
35-12.2 Test Setup
35-12.3 Test Procedure
35-12.3.1 Top Functional Load Test
35-12.3.2 Top Proof Load Test
35-12.3.3 Extendible Member Proof Load Test
37-12.4 Acceptance Levels
37-12.4.1 Top Functional Load Test
37-12.4.2 Top Proof Load Test
37-12.4.3 Extendible Member Proof Load Test
39-13 Pull Force Test
39-13.1 Purpose of Test
39-13.2 Test Setup
39-13.3 Test Procedures
39-13.4 Acceptance Level
41-14 Interlock Test
41-14.1 Purpose of Test
41-14.2 Test Setup
41-14.3 Test Procedure
41-14.4 Acceptance Levels
42-APPENDIX ZZ - VARIATIONS TO ANSI BIFMA X5.3-1997 FOR AUSTRALIA
42-ZZ1 INTRODUCTION
42-ZZ2 VARIATIONS