AS/NZS 3666.1:1995

1-AS/NZS 3666.1:1995 AIR-HANDLING AND WATER SYSTEMS OF BUILDINGS - MICROBIAL CONTROL - DESIGN, INSTALLATION AND COMMISSIONING
4-PREFACE
5-CONTENTS
6-FOREWORD
10-SECTION 1 SCOPE AND GENERAL
10-1.1 SCOPE
10-1.2 OBJECTIVE
10-1.3 APPLICATION
11-1.4 REFERENCED DOCUMENTS
12-1.5 DEFINITIONS
12-1.5.1 Aerosol
12-1.5.2 Air filter
12-1.5.3 Air-handling plant
12-1.5.4 Air-handling system
12-1.5.5 Air intake
12-1.5.6 Air outlet
12-1.5.7 Approved and approval
12-1.5.8 Biocide
12-1.5.9 Bleed-off (or Blowdown)
12-1.5.10 Building
12-1.5.11 Clean
12-1.5.12 Cleaning
12-1.5.13 Coil
12-1.5.14 Commissioning
12-1.5.15 Competent person
12-1.5.16 Cooling tower
12-1.5.17 Cooling water system
12-1.5.18 Corrosion resistant
12-1.5.19 Dead-leg
13-1.5.20 Drift
13-1.5.21 Duct
13-1.5.22 Ductwork
13-1.5.23 Evaporative air cooler
13-1.5.24 Evaporative condenser
13-1.5.25 Exhaust outlet
13-1.5.26 Hot water
13-1.5.27 Humidifier
13-1.5.28 Humidifier fever
13-1.5.29 Hypersensitivity pneumonitis
13-1.5.30 Installation
13-1.5.31 Legionnaires disease
13-1.5.32 May
13-1.5.33 Pontiac fever
13-1.5.34 Recirculation
13-1.5.35 Regulatory authority
13-1.5.36 Shall
13-1.5.37 Should
13-1.5.38 Sole occupancy dwelling
13-1.5.39 Terminal unit
13-1.5.40 Warm water
14-SECTION 2 DESIGN, INSTALLATION AND COMMISSIONING OF AIR-HANDLING SYSTEMS
14-2.1 GENERAL
14-2.1.1 Outdoor air
14-2.1.2 Access for maintenance
14-2.1.3 Provision for maintenance
14-2.1.4 Building plans
14-2.2 AIR INTAKES
14-2.2.1 General
14-2.2.2 Location
14-2.3 EXHAUST AIR OUTLETS
14-2.3.1 General
14-2.3.2 Location
14-2.4 AIR FILTERS
15-2.5 HUMIDIFIERS
15-2.5.1 Location
15-2.5.2 Integration of controls
15-2.5.3 Precipitation of moisture
15-2.5.4 Disposal of moisture
15-2.6 EVAPORATIVE AIR COOLERS
15-2.6.1 Materials and construction
15-2.6.2 Location
15-2.6.3 Drains
15-2.7 COILS
15-2.7.1 General
15-2.7.2 Disposal of condensate
15-2.8 TRAYS AND SUMPS
15-2.8.1 General
16-2.8.2 Materials and construction
16-2.8.3 Collection of condensate and water
16-2.9 CONDENSATE AND EQUIPMENT DRAINAGE
16-2.9.1 General
16-2.9.2 Discharge
16-2.10 FAN ASSEMBLIES
16-2.11 DUCTWORK AND COMPONENTS
16-2.11.1 Design and installation
16-2.11.2 Drainage
16-2.11.3 Access for inspection and cleaning
17-2.12 TERMINAL UNITS
17-2.13 COMMISSIONING
18-SECTION 3 DESIGN, INSTALLATION AND COMMISSIONING OF HEATED WATER SYSTEMS
18-3.1 GENERAL
18-3.1.1 Access for maintenance
18-3.1.2 Provision for maintenance
18-3.1.3 Materials
18-3.1.4 Pumps
18-3.1.5 Water treatment units
18-3.1.6 Water storage tanks
18-3.1.7 Layout
18-3.2 HOT WATER SYSTEMS
18-3.3 WARM WATER ABLUTION SYSTEMS
18-3.4 COMMISSIONING
19-SECTION 4 DESIGN, INSTALLATION AND COMMISSIONING OF COOLING WATER SYSTEMS
19-4.1 GENERAL
19-4.1.1 Access for maintenance
19-4.1.2 Provision for maintenance
19-4.1.3 Water treatment systems
19-4.1.4 Materials
19-4.1.5 Cooling towers
20-4.2 PUMPS
20-4.3 LOCATION
20-4.4 DRIFT CONTROL
20-4.5 CONTROL OF SOLIDS
20-4.6 SUNLIGHT
21-4.7 COMMISSIONING